Cut-away catalytic converter showing the honeycomb core that holds platinum, palladium and rhodium

Metal Max Recyclers

Why Are Some Catalytic Converters Worth $50 and Others Worth $1,000?

Published November 9, 2026 · METALMAX Recyclers

In the same week, two mates remove catalytic converters from their old cars. One is offered $60. The rest go off with a couple of hundred each. An old favorite from home calls out the number to a neighbor who has an old diesel ute and asks him for his quote again.

It is the same picture card as on multiple machines, but it pays out differently. The catalytic converter price changes dramatically based on what is inside the shell: a few grams of precious metals, and the amount of these precious metals within your specific catalytic converter.

Scrap buyers will work out what value they have put, as they are on either end of the range, and how to avoid walking away on your money when you convert into Sydney.

Cut-away catalytic converter showing the honeycomb core that holds platinum, palladium and rhodium

Quick answer

  • All a converter is worth is in terms of its contents, and not the steel shell.
  • The amount varies according to the amount of platinum, palladium, and rhodium content, whether original or aftermarket, and the vehicle the converter was a part of.
  • The price of representative scrap varies from around $50 for small units or low-grade units to $1,000 or upwards for large, high-loading units (consult current price lists).
  • As prices fluctuate with the metal market and the AUD, a quote will only be valid for a short period of time.
  • Never open or clean one of them. It must be in one piece when the customer purchases it.

How is the price of a catalytic converter determined?

A catalytic converter is a metal canister filled with a honeycomb core, usually ceramic. These precious metals are applied to that honeycomb to make exhaust gases harmless, not harmful.

Any metals that are stripped from a converter when it is scrapped are recovered by a refiner. That’s where the money is, not the steel.

The Platinum Group elements are platinum, palladium, and rhodium. The job can be done by 3 metals:

  • Platinum: more likely to be found in diesel converters.
  • Palladium: Useful in gas refiners.
  • Rhodium: it is used in small quantities, and its prices can skyrocket.

The price of each of the metals is different, and all three are moving on a daily basis. Thus, two similar weights of metal do not have to cost the same regardless of the mix.

Size and core type

Larger converters tend to have larger coated cores and thus larger amounts of recovered metal. A small hatchback will often have a smaller converter than a large engine, Ute/4WD or truck.

The cores are typically of ceramic material, although a few are made of metal foil. They are evaluated separately, and that’s why it’s important for a buyer to know which one it is before they quote.

Original or aftermarket

An original equipment (OEM) converter will have more precious metal than a lower-quality aftermarket converter. A great number of aftermarket units are at the bottom end of the market. When your car’s converter is replaced with a budget converter, don’t expect the same payment as you would if you replaced it with a factory converter.

Optional: petrol, diesel or hybrid

The fuel type is important because it impacts the metal mix and loading. Platinum is commonly used in diesel units. Are you in need of palladium or rhodium? Looking for palladium or rhodium? Some hybrid converters may have high loadings, resulting in a high value.

Scrap buyer in Sydney checking the stamped part number on a catalytic converter to work out its price

Realistic price range for a catalytic converter.

Here are only ballpark estimates to explain why there is such a gap between the two figures. Treat them like “normal” and see the prices of buyers these days.

Type of converterTypical scrap price (check)Why
Aftermarket$50 to $150Lower metal loading and a smaller core size
OEM a small or mid-size petrol car$100 to $350Moderate loading
OEM from a 4WD, ute, or large petrol car$250 to $600Larger core/ higher loading
Ute, truck or some hybrids$400 to $1,000+Large core, high precious metal content
Hollow, cored, or heavily damaged$0 to $50Little or no core left, and mostly steel value

The last row catches people out. The converter may have a hollow shell that looks good on the outside, but with no plastic. The converter may have a shell that does not contain any plastic and causes no damage. The precious metal value in a scrap catalytic converter is negligible when it lacks a honeycomb in the converter.

Why Sydney vehicles affect the cat converter price

The type of players that are going to end up on a buyer’s bench depends on local conditions, and general guidance does not account for them.

The mix of cars. In Sydney, road transport of ute and 4WD vehicles certainly features plenty of Japanese imports and hybrids as well as European vehicles. That range equates to all sorts of differences in converters, not the colour of the car so much as the part number.

Salt air and heat. Often, exhaust shells are badly corroded on cars that live along the northern beaches and along the eastern suburbs. The rusty shell doesn’t necessarily signify the downfall of the core. Similarly, the shell can be hollowed out if it looks clean. Don’t decide the value based on the appearance.

Aging vehicles. Older vehicles that are being scrapped may have a very old converter, and that converter may sell for more than the parts used in replacing it with a newer model.

How buyers work out a scrap catalytic converter price

A good buyer doesn’t make an educated guess. They typically:

  1. Use stamped codes, part numbers, or engine, vehicle make, model, and year to identify the converter.
  2. Inspect, making sure the core is whole and not cracked, melted, or emptied.
  3. Compare an equivalent with a known or sampled premium metal content, matching the grade.
  4. As obtained from current metal prices and exchange rates, with lower processing costs.

Ask the customer to tell you how they got to that number. When they cannot explain, this is a warning sign.

Common errors to reduce your reward

  1. Opening it up and scooping out the contents. It can inflict damage on the core, and the ceramic dust is not the kind of dust you want to inhale. Cubic also won’t be able to know if a unit is tampered with if you purchase it.
  2. Submitting on the first ticket. The prices are different from buyer to buyer; always get a minimum of two quotes.
  3. Failing to get back to the original vendor for a quote to convert using a flat-rate price on the phone. A fair price is dependent on the particular unit.
  4. Failure to record the information. Make sure you provide all the vehicle details (make, model, year, and engine) and take photos of any stamped codes before you sell the vehicle.
  5. Allowing damaged and undamaged units to be mixed. Honestly report damage; this impacts the grade.
  6. Neglecting the buyer’s credentials. Look for ones that have an actual address and are a solid business.

When you’re selling in Sydney, there are certain warning signs to be aware of.

If you’re a reliable buyer in Sydney, you know that converter theft is a problem and are careful about who you buy from. Watch out for:

  • A buyer that isn’t eager to demand ID or any information regarding the car.
  • No receipt/signed contract/biz info in exchange for cash.
  • Expect to receive pressure to commit to selling in the moment.
  • No information as to how the price is determined.

NSW Scrap Dealers Regulations require record-keeping; keep up to date with the legislation before selling.

The prices and perfect timing of converting cats are very important.

Prices of metals tend to fluctuate, and, in particular, rhodium has seen quite a bit of variation in the past. A statement may change from day to day.

There’s no need to buy/sell at an exact moment. See how long the quote is, then if the quote is at an appropriate price for your converter, then buy into it. There’s a risk in waiting for an uptick.

Sydney’s most affordable scrap catalytic converter sale completed on time.

These documents should be in mind prior to calling a potential buyer:

  • Photo ID
  • The make, model, year, and engine on the car.
  • Copies of the converter and its stamped codes.
  • Whether it’s a factory- or aftermarket unit, if you know

Having other scrap to pick up, such as old pipes, wiring or appliances, will also save you the trip with a collection service. We service all of Sydney’s homes and businesses with our scrap metal collection service.

The right price for a catalytic converter is a very important thing.

Between $50 and $1,000 lies the “contents,” the metals, the size of the core, whether it is original, and the vehicle from which it originated. The price of a fair catalytic converter begins with a person who recognizes the vehicle’s catalytic converter accurately and explains the number.

Since 2008, Metal Max Recyclers has collected scrap at Sydney locations. If you do have a converter (such as Scrap Load), ask us for a complimentary quotation for the value of your scrap.

FAQs

What is a catalytic converter worth in Aus?

The most common prices for catalytic converters will range from $50 up to $1000, depending on the type, but some of the larger and higher-loading scraps end up selling for much more. All the above factors- precious metal content, vehicle size, vehicle make and model, condition, and present metal market rates- determine the price. Finally, before the buyer gives you a definite price, they must know the converter you are going to use.

Why is it that my catalytic converter is so cheap?

When the price is low, usually it’s a small converter, a low precious metal load, a dud, or an aftermarket converter. This price can also decline due to heavy damage, oil or coolant contamination, and a collapsing metal market. Have the purchaser provide some details of how they computed the price.

What are the most valuable catalytic converters?

Engine size conversions, diesel trucks, 4WDs, and some hybrids tend to have more of these precious metals, and hence are worth more. Original equipment converters tend to be more highly regarded than budget-friendly aftermarket converters. The make, model, year, and part number convey a lot more to the buyer than the size or weight of the converter.

Is it legal to offer a Scrap catalytic converter in Sydney?

Yes, if it’s yours to sell. Photo ID and records are maintained by reputable Sydney scrap buyers, in part due to converter theft. Don’t be surprised by any questions regarding the vehicle it came from. If a Prospective Purchaser requests none of this, they should be considered a red flag. Ensure you are aware of the existing NSW rules when considering selling.

Are the prices of catalytic converters variable or fixed?

Yes. Offer prices are based on the spot price of platinum, palladium and rhodium, in addition to the Australian dollar exchange rate, and as such can vary from day to day. Most especially, rhodium has rallied significantly in recent history. When it’s not an emergency, seek a new quote prior to sale.

Want to know your catalytic converter price? Request a free quote and the Metal Max Recyclers team will get back to you.